Welcome to the interesting – but mostly confusing – world of EV charging!

If you’re a new EV owner, it’s good to know a bit of the jargon that’s used when talking about EV charging. This page simplifies and explains some of it, but if it’s still not making sense, give us a call!.

What are electric car charging levels and types of EV charging?

The first thing to realise is that unlike petrol and diesel vehicles there are a number of different ways to charge your car. There’s essentially two pieces of key terminology you need to understand and apply to your vehicle

Charging Levels – the power at which you can charge your electric vehicle, grouped into a few key bands (Levels 1 to 3)

Charging Types – the physical plug connector type that plugs into your electric car

Unlike petrol stations, there are a few different levels or charging rates. While they all provide electricity they do so at different speeds. The charging rates are referred to as “Levels“ – typically, the higher the level, the faster the charging.

The difference between L1, L2 and L3 EV charging in Australia and NZ

Level 1 EV Charging – Portable EVSE

This is best suited for smaller battery sizes such as those in PHEVS (Petrol-hybrid electric vehicles) or when longer charging time is available. Level 1 charging at work could also be a supplement for people driving over 40km per day, or even a substitute for those who can’t charge at home(because they don’t have a garage or fixed parking place, for example). EVolution recommends only choosing this charger if you drive under 4000km a year.

Level 2 Electric Car Charging – WallBox, Wall Chargers

The vehicle is connected directly to the electrical network via specific socket and plug and a dedicated circuit. This is the most common home and public charging level. Level 2 allows for a wide range of charging speeds, all the way up to 19.2 kilowatts (KM), or about 70 miles of range per hour of charging. Level 2 charging is much quicker because it is done at higher voltage and at higher amperage. But it requires more rugged equipment and more robust wiring to handle the extra electrons and the heat they generate.

All manufacturers recommend you install a level 2 charging station at home. Level 2 EVSE charging equipment may cost more to buy, but there’s more to be gained. there’s the obvious time savings and the increase in convenience. EVolution recommends this type of charger (for example, the Zappi or the HALO) for home installations and for business charging.

Level 3 EV Charging – DC Fast Chargers

DC Level 3 requires significant panel and service upgrades and consequently is the most expensive to deploy.

Typically 70km of range for every 10 minutes of charging. These stations require more power than your house, which is generally more than you’ll need for your daily commute. EVolution recommends Level 3 DC Fast charging for petrol station operators, motorways, street side charging, fleet vehicles and for certain commercial users. DC Charge stations range in price from as low as $25,000 for a stand-alone (not networked with other stations) and go up to $60,000 for a smart, networked charge station. Hosts purchasing multiple units qualify for volume pricing.